|
Post by Damon on Oct 16, 2008 22:41:38 GMT -5
I know I did this before, but how do you move a single bar row and keep it attached?
One of my rows is not centered in between the row above and below it - the angle is off.
Let me know.
|
|
|
Post by Moongaze on Oct 16, 2008 22:52:29 GMT -5
Open the Button Settings window for the menu button you want to edit. Inside, you'll find: - Set menu angle (adjust the angle at which all the buttons spawn from, so 0 is all button move to the right of the button) - Set menu offset (this adjusts WHERE the submenu/child buttons start around the menu button, with an angle) So, if you set the menu offset to 90 (degrees), the submenu buttons will appear ABOVE the button. Then, they will continue to spawn in the direction that the menu angle is set to (so if the angle is 0, they will start ABOVE the menu button, and then the 11 other buttons will be to the right of the first button). I hope this is what you were looking for
|
|